Oregon 75RD110G RipCut Saw Chain, 3/8" Pitch, .063" Gauge, 110 Drive Links Family_SpeedCut Nano You will need a punch

You will need a punch or drill to extract old rivets to remove the damaged sprocket

this bag will hold four various-sized bags and throw lines

and strong

Battery and charger are not included

It does this by allowing the bungee to run past the ascender all the way to the foot through a liner where it then pulls the lower tether and ascender up the line from the bottom when it is un-weighted

Oregon 75RD110G RipCut Saw Chain, 3/8" Pitch, .063" Gauge, 110 Drive Links Family_SpeedCut Nano You will need a punchSpecially made for ripping making cuts parallel to the wood grain. 75RD has a special ripping application grind for making dimensional boards and planks from larger timbers. For use on chain type sawmills. Not recommended for hand held use. Any saw mill worker will tell you that ripping chain is different from all other saw chains. You need a special kind of chain for ripping cuts, the kind that transforms raw timber into the boards and planks used in