WIFI008 8 x 16A WIFI relay bit-acc Peripheral: 8 GPIO(Include TX0\RX0 AND

Peripheral: 8 GPIO(Include TX0\RX0 AND TX1\RX1)

0 g Configurable pulse rate(2): 33

you need to connect it to your own robot controller

Maximum operating voltage: 6

Idle speed at 12 V: 90 rpm

WIFI008 8 x 16A WIFI relay bit-acc Peripheral: 8 GPIO(Include TX0\RX0 ANDThe WIFI008 provides 8 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from a 12vdc supply which can be regulated or unregulated. The DC input jack is 2. 1mm with positive core polarity, DC supplies are required to supply at least 1A at 12vdc. The relays are SPCO (Single Pole Change Over) types. The normally open, normally closed and common pins are all available on the screw terminals. The Relays on