DuraVent FasNSeal 5" 30 Degree 29-4C Stainless Steel Elbow vent-clean Features: Holes are drilled and

Features: Holes are drilled and not punched (punched holes can cause a loud whistle) Fire glass required: To be used with a 2 - 4 inch layer of fire glass for best effect (not included) Application: For use in outdoor vented natural or propane gas burning fire features ONLY Heat Rating: 88

BTU 12500 Finish RAL 8001 49/66160 Powder Coat Connector Size 8" Width 34" Overall Height 68" To Center Line Weight 165 lbs

Dedicated 15 Amps (or higher) breaker required Wiring Hardwire or Plug into 120 V Outlet Bulb Type LED Sleep Timer 30 mins

Easy to attach

8125" (A) Clearance 0” clearance to combustibles / vertical installations Listings ULC S636 is Listed as a Class IIA

DuraVent FasNSeal 5" 30 Degree 29-4C Stainless Steel Elbow vent-clean Features: Holes are drilled andAll FasNSeal (single wall) vent lengths and components feature patented built in mechanical locking band and triple lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90 from mechanical locking bands. This construction feature allows for ease of installation. The air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield